The contact of elastic regular wavy surfaces

A complete solution in closed form to the elastic contact of a one-dimensional sinusoidal surface with a flat surface was presented by Westergaard in 1939. This paper is concerned with the elastic contact of a two-dimensional sinusoidal surface with a flat. In this case the stress distribution within the elastic solids is three-dimensional. As the load is increased the contact areas change in shape from being circular to square and finally leave a circular region of no contact when the waves are almost squashed flat. The problem is solved in general using a numerical method due to Kalker, but asymptotic solutions in closed form have been found for light loads and also for heavy loads at which contact is almost complete. The variation of the mean separation with load, which determines the volume of the space trapped between the two surfaces, is also found.     

Cooperation between memory systems: Acetylcholine release in the amygdala correlates positively with performance on a hippocampus-dependent task.

The present experiment examined the relationship between release of acetylcholine (ACh) in the amygdala and performance on a hippocampus-dependent spatial working memory task. Using in vivo microdialysis, the authors measured ACh release in rats during testing on a spontaneous alternation task. Amygdala ACh release was positively correlated with performance on the hippocampus-dependent task. These findings suggest that activation of the amygdala promotes processing in other neural systems important for learning and memory. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An adaptive descent method for non-linear viscoplasticity

A forming model based on a viscoplastic flow formulation is derived which includes the effects of small elastic strains. A significant feature of the formulation is its reliance on the dominant inelastic material characteristics in the formation of the stiffness matrix for large strain problems. The resultant non-linear system of equations is solved by an adaptive descent method which combines the rapid convergence of Newton's method near the solution with the robustness of a method of successive approximations. The use of the adaptive descent method effectively extends the viscoplastic flow formulations into the nearly rate-insensitive range of behaviours exhibited, for example, by metals at low temperature, where slow convergence of the non-linear solution algorithm has traditionally hampered their use.     

The hot blow forming of AZ31 Mg sheet: Formability assessment and application development

The hot blow forming of magnesium sheet offers significant opportunity for forming complex, lightweight parts for automotive applications. This paper characterizes the elevated-temperature formability of AZ31 magnesium sheet materials and the effect of processing conditions on the performance of these materials. In addition, magnesium sheet application development at General Motors Corporation is reviewed.     

Modeling and optimization of fringe capacitance of nanoscale DGMOS devices

We analyze the impact of gate electrode thickness and gate underlap on the fringe capacitance of nanoscale double-gate MOS (DGMOS) transistors. We propose an analytical fringe capacitance model considering gate underlap and finite source/drain length. A comparison with the simulation results show that the model can accurately estimate the fringe capacitance of the device. We show that an optimum gate underlap can significantly reduce the fringe capacitance resulting in higher performance and lower power consumption. Also, the effects of process variation in gate underlap devices are discussed. Simulation results on a three-stage ring oscillator show that with optimum gate underlap 32% improvement in delay can be achieved.     

Admiral John A. B. Dahlgren (1809–1870): His life, times and technical work in U.S. naval ordnance

John Dahlgren served in the U.S. Navy for nearly 35 years, sometimes in a sea-keeping capacity but mostly developing large naval artillery. To-day, his name, when recognised by students of naval ordnance, is associated with teh Dahlgren or ‘soda bottle shaped’ gun of 9 to 11 inch calibre. He designed, developed and lived to see his guns installed aboard warships and used to considerable effect, especially in the American Civil War. However, a nearly indistinguishable external design of gun was developed for the Army by T. J. Rodman, an officer now even less known than Dahlgren and whose researches and contributions are virtually forgotten. This paper and that in Ref. [1] attempt to appreciate (along with other technical questions of the period) the different ways pursued by these men towards the final development of the ‘soda bottle shaped’ gun, though it is a matter still not entirely understood.

Both names are totally omitted from several ‘classic’ books on artillery and this is a grave misfortune. Besides trying to throw factual light on the Dahlgren-Rodman controversy and the priority issue (though not one pursued with acrimony by the men themselves at the time), the paper describes Admiral Dahlgren's general career, the books he wrote, the technical problems he attacked and the problematic ordnance discussions of his day, to which he gave his life.

The work of Dahlgren and Rodman, in particular, saw the elevation of American gun design from the level of mere copying (of early Columbiads in the first decades of the century) to that which compelled attention from, and study by, the super-powers of the day, Great Britain, France and Russia.     

Identification of microstructural zones and thermal cycles in a weldment of modified 9Cr-1Mo steel

This paper presents the results of a study on the microstructural and microchemical variations in a multipass Gas Tungsten Arc weld (GTAW) of modified 9Cr-1Mo steel. The changes brought about in the steel due to the heating and cooling cycles during welding and the subsequent effects due to reheating effects during multipass welding are described. Detailed analytical transmission electron microscopy has been carried to study the type and composition of the primary and secondary phases in this steel. The systematic changes in microstructural parameters such as Prior Austenite Grain Size, martensite lath size, number density, size and microchemistry of carbides, have been understood based on the different transformations that the steel undergoes during the heating and cooling process. Based on the observed microstructure, an attempt has been made to identify distinct microstructural zones and possible thermal cycles experienced by different regions of the weldment.     

组合斩波器为便携式应用增加带宽

对于精确地放大非常小的信号，简单的斩波放大器很适用，不过带宽有限。通过“组合“一个斩波器，带宽就能增加，使斩波器在更多的便携式设备中都有用武之地。